What problems will be encountered in the practical work of charcoal machinery and equipment?

Many people may have some knowledge of charcoal machine equipment. It is a kind of machine that uses sawdust grinder to crush particles within 10 mm, and then dries them by dryer and puts them into the carbonization furnace. Charcoal machine equipment often encounters some debugging problems, how to solve them?

The debugging method of proper start-up of charcoal machine equipment:

1. All connecting screw of charcoal machine must be tightened, especially the three top axes of heating drum.

2. After ensuring the stability of the equipment, check all smooth parts of the equipment, such as bar making machine, crusher, dryer, and add gear oil to ensure the smooth operation of the equipment.

3. Connect the power supply of the main control box and adjust the safe wiring. At this time, do not start the machine easily, you can start three to five minutes idle to see if there are abnormal phenomena, such as cards, bulges, etc., if not, you can put them into normal production and use. Once the above situation occurs, it is necessary to stop the inspection immediately and eliminate the failure completely.

4. This new machine needs to ensure that the equipment is preheated slowly. Only when the temperature rises can the machine start and enter.

5. In the feeding process, remember not to be too fast. The automatic charcoal machine runs normally after 30 minutes of shutdown. It has been proved that the test operation is successful and can be carried out in normal production.

Traditional charcoal production has seriously damaged China's forest resources. From the perspective of sustainable development, we have formulated a series of measures to protect and improve the ecological environment, and completely prohibited deforestation of natural forests. Strictly restrict the use of natural forest kiln charcoal, agricultural and forestry waste generation mechanism charcoal, resolutely support the introduction of policy documents and give policy support. If you need a charcoal machine, you can contact us.